10-31-2021 10:34 PM - edited 10-31-2021 10:34 PM
Hello all,
I need your support. How to configure the cisco firewall fpr 2120. Now it is configured in ASA mode
10-31-2021 10:58 PM
Hi,
here you can find the way to quick deploy the device according to your management method.
https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/fp2100/firepower-2100-gsg.html
rate and mark as answer, if this solved your issue
11-01-2021 02:27 AM - edited 11-01-2021 02:28 AM
Thanks for your support,
Actually, the requirement is I want to configure the cisco firewall fpr 2120 configure. Now it is configured in ASA mode, but there I cant use the IDS/IPS modul. The FTD mode is available on the server, but I don't know that how to use the web interface to configure on FTD mode. I could not use CLI. In the CLI I can check only the configuration. Kindly check the below screenshot.
11-01-2021 06:53 AM
When your Firepower 2120 is running ASA mode, it needs to be reimaged to switch to FTD mode. Please see this document for detailed instructions:
Of course this will erase any existing configuration.
Note that running FTD will also require licenses - Base license at a minimum and Threat license to use the IPS features. URL Filtering and Malware license are also available. You can start off running a 90-day evaluation license.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide