06-11-2011 02:06 AM - edited 03-11-2019 01:43 PM
Hello All,
I am setting up a Cisco ASA 5505 first time for My organisation, I usually setup Cisco Router, I have 10 Static IP, & Have 6 Server (S-1, S-2, S-3, S-4, S-5, S-6), Traffic Should be pass through the ASA and is distributed to the destination server that is specified in the packet. LAN servers can be separated into discrete networks for security. For example, a private LAN for internal traffic accessed only via remote dial-in VPN sessions and Want to Configure DMZ for Server (S-4, S-5, S-6) that allows public web traffic.
I have Attached My Network Diagram please look on this
I have some question,
1:- Can we Configure Multiple Static IP On ASA 5505 ?
2:- If Diagram is wrong so please suggest what change need to be done ?
3:- Can some body help Me step by step Guidence ?
Vikrant
06-11-2011 06:44 AM
Maybe ask this on Security forum where the ASA pertains as product ?
06-11-2011 08:32 AM
refer to the below links and let me know if this helps, this will give you some direction
for setting up remote vpn clients
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/vpnrmote.html
this gives you some idea on how to set up asa for server access for users on internet
apart from tht here is a config guide in general
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/fwmode.html
try using asdm if you are using newer versions of code, it is good for some one who is still learning to configure asa
let me know if you are stuff somewhr
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide