Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Vikrant Ambhore
Stats
Member since
04-20-2010
243
Posts
5
Helpful
0
Solutions
Created by
Vikrant Ambhore
in Firewalls
in Firewalls
11-23-2015
03:35 AM
11-23-2015
03:35 AM
Hi Friends, I am new for cisco ASA 5540, I just bought cisco ASA 5540 for my small office setup and version is Cisco Adaptive Security Appliance Software Version 8.0(3) Device Manager Version 7.2(1), can anybuddy help me to configure device. I am trying to configure Vlan but getting following error. please help me Thanks in advance
)# interface gigabitEthernet Vlan1 ^ ERROR: % Invalid input detected at '^' marker. XXXXXX(config)#
... View more
Labels:
Created by
Vikrant Ambhore
in Firewalls
in Firewalls
05-28-2015
12:20 AM
05-28-2015
12:20 AM
Hello Friends, We have configured multiple Public IP on On the ASA but there are no multiple addresses on an interface. But my scenario is solved with NAT. For each node/port-combination you configure an object and define the NAT-settings (which are a port-forwarding), so my question is I want to allow ICMP on XX.XX.XX.32, XX.XX.XX.33, XX.XX.XX.34, XX.XX.XX.35 Please suggest how to do it interface Vlan1 nameif outside security-level 0 ip address XX.XX.XX.31 255.255.255.0 ! interface Vlan2 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! boot system disk0:/asa825-k8.bin ftp mode passive dns domain-lookup outside dns domain-lookup inside dns server-group COLODNS name-server 127.0.0.1 name-server 8.8.8.8 name-server 192.168.1.1 name-server 206.183.111.1 same-security-traffic permit inter-interface same-security-traffic permit intra-interface access-list global_access extended permit ip any any access-list inside_access extended permit ip any any access-list inside_access extended deny ip any any inactive access-list outside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any access-list outside_access_in extended permit tcp any any eq ssh pager lines 24 mtu outside 1500 mtu inside 1500 ip verify reverse-path interface outside icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp XX.XX.XX.32 www 192.168.1.5 www netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.33 www 192.168.1.5 8080 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.34 www 192.168.1.5 7070 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.32 8983 192.168.1.5 8983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.34 9983 192.168.1.5 9983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.34 10222 192.168.1.5 ssh netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.35 www 192.168.1.2 www netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.36 www 192.168.1.2 8080 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.35 85 192.168.1.2 85 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.35 10389 192.168.1.2 3389 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 www 192.168.1.3 www netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 8080 192.168.1.3 8080 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 10222 192.168.1.3 ssh netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 9983 192.168.1.3 9983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 8983 192.168.1.3 8983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.38 www 192.168.1.3 7070 netmask 255.255.255.255 access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX.1 1
... View more
- Tags:
- #5505 #asa #5515
Labels:
05-23-2015
01:11 AM
Hi All, Thanks to all Now working fine as per my requirements but im worried about security also having some issue behind the firewall, we are facing some Internet issue on Server whatever we start download on server its downloading always freeze for long time. Looks like its network related issue or maybe related to DNS, would be a great if you can review my below config and please suggest if any changes required. ASA Version 8.2(5) ! hostname XX.XX.XX.XX enable password XXXXXXXXXXXX encrypted passwd XXXXXXXXXXXX.XXXXXXXXXXXX encrypted names ! interface Ethernet0/0 description uplink from switch speed 100 duplex full ! interface Ethernet0/1 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/2 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/3 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! interface Vlan1 nameif outside security-level 0 ip address XX.XX.XX.31 255.255.255.0 ! interface Vlan2 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! boot system disk0:/asa825-k8.bin ftp mode passive dns domain-lookup outside dns domain-lookup inside dns server-group COLODNS name-server 127.0.0.1 name-server 8.8.8.8 name-server 192.168.1.1 name-server 206.183.111.1 same-security-traffic permit inter-interface same-security-traffic permit intra-interface access-list global_access extended permit ip any any access-list inside_access extended permit ip any any access-list inside_access extended deny ip any any inactive access-list outside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any access-list outside_access_in extended permit tcp any any eq ssh pager lines 24 mtu outside 1500 mtu inside 1500 ip verify reverse-path interface outside icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp XX.XX.XX.32 www 192.168.1.5 www netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.33 www 192.168.1.5 8080 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.34 www 192.168.1.5 7070 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.32 8983 192.168.1.5 8983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.34 9983 192.168.1.5 9983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.34 10222 192.168.1.5 ssh netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.35 www 192.168.1.2 www netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.36 www 192.168.1.2 8080 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.35 85 192.168.1.2 85 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.35 10389 192.168.1.2 3389 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 www 192.168.1.3 www netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 8080 192.168.1.3 8080 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 10222 192.168.1.3 ssh netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 9983 192.168.1.3 9983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.37 8983 192.168.1.3 8983 netmask 255.255.255.255 static (inside,outside) tcp XX.XX.XX.38 www 192.168.1.3 7070 netmask 255.255.255.255 access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization command LOCAL http server enable http XXX.XXX.111.25 255.255.255.255 outside http XXX.XXX.111.235 255.255.255.255 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh scopy enable ssh XXX.XXX.XXX.25 255.255.255.255 outside ssh XXX.XXX.XXX.235 255.255.255.255 outside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection scanning-threat shun duration 3600 threat-detection statistics host threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn username admin password XXX encrypted privilege 15 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:e848ee77bf67de57b04768ff5785f4f3 : end
... View more
Created by
Vikrant Ambhore
in Firewalls
in Firewalls
05-22-2015
05:57 AM
05-22-2015
05:57 AM
Hi Is it possible to configure multiple public IP Addresses (around-8) on Cisco ASA 5505, actuly we have total 3 servers behind the firewall and more application working on below mentioned ports actuly I want to translate traffic 80 to 8080(Private IP) as per below mentioned details LAN IP:- Node-1 -----192.168.1.5 Node-2 -----192.168.1.2 Node-3 -----192.168.1.3 Sample Public IP which you will configure on ASA:- XX.XX.XX.-- Node-1 192.168.1.5:80 <--------------------------------> XX.XX.XX.1:80 192.168.1.5:8080 <--------------------------------> XX.XX.XX.2:80 ---------------------Here 80 port must be forward to 8080 192.168.1.5:8983 <--------------------------------> XX.XX.XX.1:8983 192.168.1.5:7070 <--------------------------------> XX.XX.XX.3:80 --------------------- Here 80 port must be forward to 7070 192.168.1.5:9983 <--------------------------------> XX.XX.XX.3:9983 192.168.1.5:22 <--------------------------------> XX.XX.XX.1:10222 --------------------- Here 10222 port must be forward to 22 Node-2 192.168.1.2:80 <--------------------------------> XX.XX.XX.4:80 192.168.1.2:8080 <--------------------------------> XX.XX.XX.5:80 192.168.1.2:85 <--------------------------------> XX.XX.XX.5:85 192.168.1.2:3389 <--------------------------------> XX.XX.XX.5:10389 --------------------- Here 10389 port must be forward to 3389 Node-3 192.168.1.3:80 <--------------------------------> XX.XX.XX.6:80 192.168.1.3:8080 <--------------------------------> XX.XX.XX.6:8080 192.168.1.3:9983 <--------------------------------> XX.XX.XX.6:9983 192.168.1.3:8983 <--------------------------------> XX.XX.XX.6:8983 192.168.1.3:22 <--------------------------------> XX.XX.XX.6:10222 --------------------- Here 10222 port must be forward to 22 192.168.1.3:7070 <--------------------------------> XX.XX.XX.7:80 --------------------- Here 80 port must be forward to 7070
... View more
- Tags:
- cisco asa 5505
Labels:
Created by
Vikrant Ambhore
in Switching
in Switching
01-30-2012
01:08 AM
01-30-2012
01:08 AM
Hi Friends, I am Having issue with routing over DMVPN, all sites are working fine but I just added 1 more site now we have 4 sites connected over VPN following are detail Can you please look on my attached Diagram also i have upload the config of each site, Perth is HUB & rest is Spoke, All is fine between Perth, India, & Melbourne, I can Ping to each site from each site, Now I just newly added New-Zeeland Office, it's showing connected & VPN is UP when I see by sh crypto isakmp sa but I am Unable to Ping Perth, Melbourne & India also should be ping NZ from each site Can you please help me Vikrant
... View more
Labels:
Created by
Vikrant Ambhore
in Voice Systems
in Voice Systems
01-24-2012
08:51 PM
01-24-2012
08:51 PM
Hi, I got UC520 to setup & used in office, i have configured it, & I have checked Internet on Router it's working fine, I can ping Outside from console but no buddy can access Internet from UC520 by LAN because System's are not getting IP from DHCP Server also we are unable to found WiFi signal of UC520 from any Laptop, I am not sure if I'm wrong in Configuration Can anyone help me? Thanks in Advance UC520#sh run
Building configuration...
Current configuration : 4834 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname UC520
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXXXXXXXXXXXXXXXX
!
no aaa new-model
network-clock-participate wic 1
!
!
!
!
!
dot11 ssid KiwiKrane-voice
vlan 100
authentication open
authentication key-management wpa
wpa-psk ascii 7 XXXXXXXXXXXXXXXXXX
!
dot11 ssid Kiwikrane
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 XXXXXXXXXXXXXXXXXX
!
ip cef
!
!
ip dhcp relay information trust-all
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.6.1 192.168.8.10
ip dhcp excluded-address 10.10.11.1 10.10.11.10
!
ip dhcp pool DATA
network 192.168.6.0 255.255.255.0
default-router 192.168.6.1
dns-server 8.8.8.8 8.8.4.4
!
ip dhcp pool VOICE
network 10.10.11.0 255.255.255.0
default-router 10.10.11.1
option 150 ip 10.1.1.1
!
!
no ip domain lookup
ip name-server 203.109.129.67
ip name-server 203.109.129.68
ip name-server 8.8.8.8
ip name-server 8.8.4.4
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
no dspfarm
!
!
!
username XXXXXXXXXXXXXXXXXX privilege 15 password 7 XXXXXXXXXXXXXXXXXX
archive
log config
hidekeys
!
!
bridge irb
!
!
!
interface FastEthernet0/0
description -= WAN PORT =-
ip address 192.168.0.254 255.255.255.0
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface Integrated-Service-Engine0/0
no ip address
shutdown
!
interface FastEthernet0/1/0
switchport voice vlan 100
macro description cisco-phone | Cisco 7960
!
interface FastEthernet0/1/1
description -= Switch =-
switchport trunk allowed vlan 1,100,1002-1005
switchport mode trunk
!
interface FastEthernet0/1/2
!
interface FastEthernet0/1/3
!
interface FastEthernet0/1/4
!
interface FastEthernet0/1/5
switchport voice vlan 100
macro description Cisco 7906
!
interface FastEthernet0/1/6
switchport voice vlan 100
macro description Cisco 7906
!
interface FastEthernet0/1/7
switchport voice vlan 100
macro description Cisco 7906
!
interface FastEthernet0/1/8
!
interface BRI0/1/0
no ip address
!
interface BRI0/1/1
no ip address
!
interface Dot11Radio0/5/0
no ip address
ip virtual-reassembly
!
encryption vlan 100 mode ciphers tkip
!
encryption vlan 1 mode ciphers tkip
!
ssid KiwiKrane-voice
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
station-role root
world-mode dot11d country NZ both
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0/5/0.1
encapsulation dot1Q 100
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0/5/0.2
encapsulation dot1Q 1 native
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
!
interface Vlan1
no ip address
ip virtual-reassembly
bridge-group 2
bridge-group 2 spanning-disabled
!
interface Vlan100
no ip address
ip virtual-reassembly
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Dialer1
no ip address
!
interface BVI1
ip address 10.10.11.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface BVI2
ip address 192.168.6.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1380
!
ip route 0.0.0.0 0.0.0.0 192.168.0.1
!
ip http server
no ip http secure-server
ip nat inside source list NAT-ALLOWED interface FastEthernet0/0 overload !
ip access-list extended NAT-ALLOWED deny ip any 10.0.0.0 0.255.255.255 permit ip 192.168.6.0 0.0.0.255 any !
!
!
!
!
!
control-plane
!
!
!
voice-port 0/0/0
!
voice-port 0/0/1
!
voice-port 0/0/2
!
voice-port 0/0/3
!
voice-port 0/1/0
!
voice-port 0/1/1
!
voice-port 0/2/0
!
voice-port 0/2/1
!
voice-port 0/2/2
!
voice-port 0/2/3
!
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control
description Music On Hold Port
!
!
!
!
!
!
... View more
Labels:
Created by
Vikrant Ambhore
in Collaboration, Voice and Video Blogs
in Collaboration, Voice and Video Blogs
09-14-2011
09:37 PM
09-14-2011
09:37 PM
Hi William, It's Good Article, I need your guidence for using VOIP on Android through UC520 We are using Cisco UC520 router for VOIP, Now I want to use Cisco Jabber with UC520, We have Android Phone & we want to configure Jabber with UC520 & want to place & receive call from My android phone by UC520, I download & Install Cisco Jabber on Android, but I am having too trouble & can't understand where to start, I have the TFTP server address but What do I enter in the device id field in Android ? At the moment I have Version 4.2(0) Cisco Unified Communications Manager Express But I am going to update it to CUE is 8.2 If Cisco Jaaber is not supported on UC520 so please suggest me any good application for Android from UC520 Can you help me ?
... View more
Created by
Vikrant Ambhore
in Other Wireless - Mobility Subjects
in Other Wireless - Mobility Subjects
09-03-2011
03:27 AM
09-03-2011
03:27 AM
Thanks it's fix I played with it more time, & got success
... View more
Created by
Vikrant Ambhore
in Other Wireless - Mobility Subjects
in Other Wireless - Mobility Subjects
08-30-2011
08:49 PM
08-30-2011
08:49 PM
Hello migilles, I installed USB driver & Now I am able to access Phone by GUI, but still having same issue, I think something wrong on Access point, Please help me,
... View more
Created by
Vikrant Ambhore
in Other Wireless - Mobility Subjects
in Other Wireless - Mobility Subjects
08-21-2011
04:14 AM
08-21-2011
04:14 AM
Hi Migilles, Thanks for your reply I got your document, looks like is good Thanks for post it, Now I am trying to configure Phone through GUI as per attached document (Page no. 71), but phone is not showing in device manager i think some drivers required for it, I searched on net but didn't get anything for supported driver, can you help me for that, as per my think my issue will fix if I get driver 7 will try through GUI
... View more
Created by
Vikrant Ambhore
in Other Wireless - Mobility Subjects
in Other Wireless - Mobility Subjects
08-20-2011
01:34 AM
08-20-2011
01:34 AM
Hi All, I'm trying to connect Cisco 7921 wi-fi IP Phone to cisco Access point but cisco IP phone getting authantication fail error can anyone suggest me, What could be the problem there, I have attached Snap of configuration of my IP phone & below is my configuration of Wi-fi Access Point Current configuration : 2353 bytes ! version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname CiscoAPWiFI ! enable secret 5 XXXXXXXXXXXXXXXXXXXX ! ip subnet-zero ! ! no aaa new-model dot11 vlan-name Data vlan 1 dot11 vlan-name VOIP vlan 100 ! dot11 ssid Coinop vlan 1 max-associations 25 authentication open authentication key-management wpa guest-mode mbssid guest-mode dtim-period 1 wpa-psk ascii 7 XXXXXXXXXXXXXXXXXXXX ! dot11 ssid VoiceCoinop vlan 100 authentication open authentication key-management wpa wpa-psk ascii 7 XXXXXXXXXXXXXXXXXXXX ! dot11 network-map ! ! username XXXXXXXXXXXXXXXXXXXX password 7 XXXXXXXXXXXXXXXXXXXX ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption mode ciphers tkip ! encryption vlan 1 mode ciphers tkip ! encryption vlan 100 mode ciphers tkip ! ssid Coinop ! ssid VoiceCoinop ! mbssid speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root access-point ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.100 encapsulation dot1Q 100 no ip route-cache bridge-group 100 bridge-group 100 subscriber-loop-control bridge-group 100 block-unknown-source no bridge-group 100 source-learning no bridge-group 100 unicast-flooding bridge-group 100 spanning-disabled ! interface FastEthernet0 no ip address no ip route-cache duplex auto speed auto hold-queue 160 in ! interface FastEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface FastEthernet0.100 encapsulation dot1Q 100 no ip route-cache bridge-group 100 no bridge-group 100 source-learning bridge-group 100 spanning-disabled ! interface BVI1 ip address 192.168.8.254 255.255.255.0 no ip route-cache ! ip default-gateway 192.168.8.1 ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ! ! control-plane ! bridge 1 route ip ! ! !
... View more
Labels:
Created by
Vikrant Ambhore
in IP Telephony and Phones
in IP Telephony and Phones
08-04-2011
01:56 AM
08-04-2011
01:56 AM
Hi Friends, I have Cisco UC520 router, I am trying to configure X-Lite SIP Application with my Cisco router, but im stuck on the there, I have one way audio using the X-Lite SIP Application, I can Make call from X-lite to Cisco IP phone (202) which is already configured on UC-520, but can't make call to X-lite from Cisco IP phone (202) & I can hear sound of X-lite user on IP phone but not getting any sound on X-lite please somebody help me trunk group ALL_FXO ! ! voice call send-alert voice rtp send-recv ! voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip supplementary-service h450.12 sip registrar server expires max 3600 min 1 no update-callerid ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! ! ! ! ! ! ! ! ! ! voice register global mode cme source-address 192.168.2.1 port 5060 max-dn 5 max-pool 5 authenticate register time-format 24 date-format D/M/Y file text create profile sync 0021602546801376 ! voice register dn 1 number 1111 allow watch name 1111 label 1111 ! voice register pool 1 id mac 0000.0000.0000 session-transport tcp number 1 dn 1 dtmf-relay rtp-nte username XXXXX password XXXXXX codec g711ulaw ! ! voice translation-rule 1111
... View more
Labels:
07-11-2011
03:25 AM
Thanks for your reply, Can you please look My configuratiion, I am not getting where i wrong Connections are as below ADSL Modem<----->ASA (interface Ethernet0/0) ASA<----------->L-2 Switch(interface Ethernet0/1) Juniper<------->ASA (interface Ethernet0/2) this Interface is Not configure yet Thanks Vikrant
... View more
07-11-2011
02:20 AM
Hello All Experts, I have some query In my Network, Please Look on my Attached Diagram & Configuration for getting More details, 1:-I Must need to Ping 10.34.249.0/27 from 172.16.105.0/24 & vice-versa but Gateway should be Juniper Router on Server, I am able to Ping if I used VLAN-10 as a gateway, but if I used VLAN-10 then I am unable to ping RBI Network 2:-I need Internet from ASA, I am able to Access Internet from ASA If I plugged my LAP-TOP to ASA directly, 3:-All Server should be Able to ping RBI Network, presently I am able to ping RBI Network because I am using Juniper as a gateway, I must to Below thing *I want to Access Server from 172.16.105.0/24 *I must need to Access RBI Network *I need Internet on Server through ASA Please Someone help me, Vikrant
... View more
Labels:
11-23-2015
Hi Friends,I am new for cisco ASA 5540, I just bought cisco ASA 5540 for
my small office setup and v...
Created by
Vikrant Ambhore
in Firewalls
05-28-2015
05-28-2015
Hello Friends,We have configured multiple Public IP on On the ASA but
there are no multiple addresse...
05-23-2015
Hi All,Thanks to all Now working fine as per my requirements but im
worried about security also havi...
05-22-2015
HiIs it possible to configure multiple public IP Addresses (around-8) on
Cisco ASA 5505, actuly we h...
01-30-2012
Hi Friends,I am Having issue with routing over DMVPN, all sites are
working fine but I just added 1 ...
Created by
Vikrant Ambhore
in Voice Systems
01-24-2012
01-24-2012
Hi,I got UC520 to setup & used in office, i have configured it, & I have
checked Internet on Router ...
Created by
Vikrant Ambhore
in Unified Communications Infrastructure
12-06-2011
12-06-2011
Hello FriendsI have a Cisco UC520 router. I am getting more trouble
while configuring Cisco 7925 G w...
Created by
Vikrant Ambhore
in Unified Communications Infrastructure
11-17-2011
11-17-2011
Hello Sdistef,Thanks for your quick replyI can Add manually Type as 7925
in CLI, Can you please sugg...
Created by
Vikrant Ambhore
in Unified Communications Infrastructure
11-17-2011
11-17-2011
Hello FriendsI have a UC520 with access points. I have two ssids created
on the UC520, one ssid poin...
Created by
Vikrant Ambhore
in Unified Communications Infrastructure
11-17-2011
11-17-2011
Hello FriendsI have a UC520 with access points. I have two ssids created
on the UC520, one ssid poin...
Created by
Vikrant Ambhore
in Collaboration, Voice and Video Blogs
09-14-2011
09-14-2011
Hi William,It's Good Article, I need your guidence for using VOIP on
Android through UC520 We are us...
Created by
Vikrant Ambhore
in Unified Communications Infrastructure
09-14-2011
09-14-2011
Hi All,I have Cisco UC520 router with CUE 4.2, it's 3 years Old, I want
to Upgrade it, So i buy New ...
08-30-2011
Hello migilles,I installed USB driver & Now I am able to access Phone by
GUI, but still having same ...
Created by
Vikrant Ambhore
in Collaboration Applications
08-26-2011
08-26-2011
Hello Prashanthi Velpula,Thanks for your reply, I have Upgradre to CUE
8.2 but i am still confused f...
Public Statistics
| Date Registered | 04-20-2010 12:21 AM |
| Date Last Visited | 10-09-2017 01:19 PM |
| Total Messages Posted | 243 |
| Total Helpful Votes Received | 5 |
.jpg "Hall of Fame Master"){kind=icon}
