How to troubleshoot when there is problem on PIX?

[ahpark78]

Hi,

I am trying to figure out how to troubleshoot,example, how to get the log from the PIX or any URL that is useful on this troubleshooting section..

thanks in advanced.

ken

[m.sir]

You can turn on logging with commands

logging enable

logging timestamp

logging buffered informational

You can verify log with command

show logg

Check this link

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml

M.

[zubairjalal]

A good doc from cisco is attached. It basically will guide you in case you want to troubleshoot the pix firewall say in cases of performance degradation.

--Pls rate if it helps--