
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-31-2011 11:51 AM - edited 03-11-2019 02:44 PM
Here is what i need.
Servers at Vlan 6 must see servers at Vlan 2, 10, 11, 12. and and vica versa
How to write the correct commands.
Here is my outputs:
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4
2 ****OFFICE_SERVERS**** active Fa1/0/13, Fa1/0/14, Fa1/0/15, Fa1/0/16, Fa1/0/17, Fa1/0/18, Fa1/0/19, Fa1/0/20, Fa1/0/25
Fa1/0/26, Fa1/0/29, Fa1/0/30, Fa1/0/33, Fa1/0/34
4 ****END_USER**** active Fa1/0/39
6 ****ILO**** active Fa1/0/1, Fa1/0/2, Fa1/0/3, Fa1/0/4, Fa1/0/5, Fa1/0/6, Fa1/0/7, Fa1/0/8, Fa1/0/9, Fa1/0/10
10 ****WEB**** active Fa1/0/27, Fa1/0/28, Fa1/0/31, Fa1/0/32, Fa1/0/43
11 ****APP_SERVERS**** active Fa1/0/11, Fa1/0/12, Fa1/0/21, Fa1/0/22, Fa1/0/35, Fa1/0/36
12 ****DB_SERVERS**** active Fa1/0/23, Fa1/0/24, Fa1/0/37
99 ****VISITORS**** active
Gateway of last resort is 192.168.0.253 to network 0.0.0.0
C 192.168.10.0/24 is directly connected, Vlan100
172.16.0.0/24 is subnetted, 6 subnets
C 172.16.29.0 is directly connected, Vlan99
C 172.16.30.0 is directly connected, Vlan6
C 172.16.9.0 is directly connected, Vlan3
C 172.16.10.0 is directly connected, Vlan4
C 172.16.0.0 is directly connected, Vlan1
C 172.16.1.0 is directly connected, Vlan2
C 192.168.0.0/24 is directly connected, Vlan5
S* 0.0.0.0/0 [1/0] via 192.168.0.253
Solved! Go to Solution.
- Labels:
-
NGFW Firewalls
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-31-2011 12:12 PM
Hello,
It appears to be switch configuration. If you create Vlan interface on this switch, as these are drectly connected subnets, they should able to communicate.
hth
MS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-31-2011 12:12 PM
Hello,
It appears to be switch configuration. If you create Vlan interface on this switch, as these are drectly connected subnets, they should able to communicate.
hth
MS
