06-03-2010 03:45 PM - edited 03-10-2019 05:01 AM
THE IDSM-2 IPS Sensor in my 6509 switch was not auto updating from version 6.1(1)E3 S297, so I manually updated it to 7.0(2)E4 S480. Unfortunately it still won't auto update from cisco.com and I think the url it is using is not correct. My IDSM-2 Configuration has the url of:
https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
Is there a more current URL I should be using?
Jim
Solved! Go to Solution.
05-31-2011 08:31 AM
Thanks for your help. I'll work with those two ranges.
01-21-2012 10:42 PM
IPS will check if update available through 198.133.219.25/443 and will download it through 72.163.7.55/80 so if you have any firewall in between try to configure both an don the IPS level configure:
https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
best regards,
bashar
04-29-2013 10:51 AM
The following document discusses the IPS auto-update feature in more detail. Please note that the auto-update locator server IP recent changed from 198.133.219.25 to 72.163.4.161. The second document covers the steps required to change the IPS configuration to reflect the new IP address.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide