Integration of AD with FTD using ISE as identity source

[Juan Carlos Arias Perez]

Hello, can someone please help me with a configuration guide with requirements for integration of AD with FTD (FMC) using ISE as Identity source for captive portal authentication.

Regards,

Juan Carlos Arias

[balaji.bandi]

You can use in FMC Identity source as ISE :

https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config-guide-v63/control_users_with_ise_ise_pic.html

ISE will be using AD user base (make sure this is not Enterprise Group you like to get authenticated, Gues should have different Group on AD with less restriction what resources to use if you mix with Group possibilities of compromise the system)

ISE with AD integration.

https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/ise_active_directory_integration/b_ISE_AD_integration_2x.html