cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1078
Views
0
Helpful
3
Replies

IPS module can not access in ASA 5520

thantzawmya
Level 1
Level 1

                   I purchased asa 5520 with AIP-SSM-20 last a few ago . I try to ping to IPS from ASDM as well as from management PC (I assigned IP as 192.168.1.5) but I can not access/ping to IPS modules ( 192.168.1.2 ) . Please see below info of "show module 1 detatils".

Appreciate your help...

Card Type:          ASA 5500 Series Security Services Module-20

Model:              ASA-SSM-20

Hardware version:   1.0

Serial Number:      JAF1438DKRE

Firmware version:   1.0(11)2

Software version:   6.0(5)E2

MAC Address Range:  44d3.ca0f.0087 to 44d3.ca0f.0087

App. name:          IPS

App. Status:        Up

App. Status Desc:  

App. version:       6.0(5)E2

Data Plane Status:  Up

Status:             Up

Mgmt IP addr:       192.168.1.2                                                

Mgmt web ports:     443                                                        

Mgmt TLS enabled:   true       

Card Type:          ASA 5500 Series Security Services Module-20

Model:              ASA-SSM-20

Hardware version:   1.0

Serial Number:      JAF1438DKRE

Firmware version:   1.0(11)2

Software version:   6.0(5)E2

MAC Address Range:  44d3.ca0f.0087 to 44d3.ca0f.0087

App. name:          IPS

App. Status:        Up

App. Status Desc:  

App. version:       6.0(5)E2

Data Plane Status:  Up

Status:             Up

Mgmt IP addr:       192.168.1.2                                                

Mgmt web ports:     443                                                        

Mgmt TLS enabled:   true        

3 Replies 3

sawgupta
Level 1
Level 1

Have you updated the access list on SSM module ?

Issue "session 1" from ASA to login to SSM and then on SSM issue "setup" command to update the access list.

Unless the IP address from which you wish to connect to SSM is not in the access list of SSM, it won't be able to connect.

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ssm.html

Regards,

Sawan Gupta

Thanks & Regards, Sawan Gupta

Hi Sawan.

Thanks for your help.

Now I can access/ping to IPS but when I login to https://192.168.1.2 and click "Run IDN" , it showing that "Unable to lunch application" and detail is "Unable to load resource: https://192.168.1.2/public/idm/idm.jnlp

I also try from ASDM and it show " Error connecting to sensor"

plase advise how can i proceed.

Regards,

I think you have incompatible Java version installed. You may want to install JRE 6.33 and then try.

Regards,

Sawan Gupta

Thanks & Regards, Sawan Gupta
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: