cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2931
Views
5
Helpful
2
Replies
Layer_Two
Beginner

Limit speed on port or VLAN? - ASA 5505

Hi,

We need to have one connection with less internet bandwidth assigned to it than all other other connections. Basically it is a separate conection from all others, incomming just from one switch port and separate VLAN

I know this can be done on the switch by limiting the bandwidth allocated to a port,

Switch(config)# interface gigabitethernet2/0/1

Switch(config-if)# srr-queue bandwidth limit 80

however, is it possible to have the speed limited down, just before it goes to the internet, ie, on the ASA, rather than doing it on the switch?

The firewall is an ASA 5505

Thank you in advance

2 REPLIES 2
Maykol Rojas
Cisco Employee

Hello,

You can use Policing QoS.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

Version is a bit old, but it still applies.

Mike

Mike

Thank you!

Create
Recognize Your Peers
Polls
Which of these topics should we host an event in the Community?

Top Choice: pxGrid (36%)

Content for Community-Ad