Setup our ASA 5505 back in the day, no problem, but this ASA 5506X is killing me. I have
interface Management1/1
management-only
nameif management
security-level 0
ip address 192.168.0.3 255.255.255.0
Firewalls, ASA 5506-X, ASA,
but now it won't let me setup gi 1/1 as any IP on that subnet. "The ip address, 192.168.0.2/255.255.255.0 can not overlap with the subnet of interface management"
I know on my 5505 I had management and inside on the same ip address. Do I have to configure the inside address first and then not specify an IP for the management port? I was kind of hoping to have that as a totally separate physical RJ-45 port, so it could only be administered on the net if I specifically mechanically plugged in that cable.