01-30-2023 02:14 PM
Hi there
I am currently beginning a PoC for the ASAv on Microsoft Azure. I have installed the Marketplace offering, which has created all the resource groups, NIC's etc and the ASAv machine is running.
I have created a secondary machine within the virtual network, from which I am able to PuTTY to the ASAv and I have set an enable password.
From this point, I am trying to access the web interface for ASDM but unable to do so. According to the documentation, the web interface/service for ASDM should be pre-configured, but trying to access https://_assigned_ip_/admin goes nowhere. I have tried using the ASAv management interface private IP and public IP, both have the same result.
Can anybody help me identify what I am missing here please? I am very new to Cisco and just getting used to using the commands.
Thanks,
Kay
01-30-2023 04:38 PM
Sure, according to the document - The ASAv deployment preconfigures ASDM access. You can connect to the ASAv management IP address with a web browser from the client IP address you specified during deployment.
if you are able to login using SSH with putty.
check http server enable in the config, check asmd - show asdm image
01-30-2023 05:32 PM
there are steps to access ASDM, check this link for necessary commands
https://www.grandmetric.com/knowledge-base/design_and_configure/cisco-asa-enable-asdm-access-asa/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide