09-01-2009 02:30 AM - edited 03-11-2019 09:11 AM
Hi,
I've migrated from cisco 1721 to 1841.
This router has 2 adsl wics(1wic 1hwic) and one lan interface with 2 lan addess configured. Behind the router is a firewall.
See the attached file.
This firewall enables a tunnel, because of this there is no vpn config into the router.
This config ran fine into with 1721 but this 1841 has the latest IOS which has a new ios firewall. I think there is a problem with the rules.
Remote ips are:
access-list 117 permit ip host 217.204.95.134 any
access-list 117 permit ip host 82.110.62.66 any
access-list 117 permit ip host 217.204.95.135 any
And the outside interface:
interface ATM0/1/0.1 point-to-point
Best regards
09-01-2009 02:41 AM
Hi
Could you draw us a layout of the network, also you've attached the config and not the log, so could you add what error messages you're getting and detail what issues you are having please?
Cheers
Kev
09-01-2009 02:47 AM
Hi,
The router has 2 wic interfaces...with this scenario only the second one.
Scenario->
Wic->router->watchdog firewall(enabled a 3des vpn).
This firewall has an ip address like 10.168.157.x.
The problem is... is impossible to stablish this vpn, no connection from remote sites 217.x.x.x to this firewall.
09-02-2009 01:33 AM
Hi
still waiting for the sh log attachedment to see if the logs show why it isn't working.
Kev
09-02-2009 04:26 AM
Hi,
Do not worry!!!
I switched to my old 1721 until the problem will be resolved.
This friday afternoon I'll connect again my 1841 and data will be posted ok?
Best regards
09-02-2009 10:03 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide