cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1655
Views
0
Helpful
5
Replies

monitor SFR module on asa with firepower services via snmp

MaErre21325
Beginner
Beginner

Hello everybody,

 

i need to know if is possible to monitor via snmp the SFR modules of an asa with firepower services pair.

i've configured snmp both on asa and fmc but i'm not able to monitor the SFR modules, what can i do to fix(if it possibile)?

asa is running version 9.8.4, fmc 6.6.0 and sfr module is 6.6.4.

 

thanks 

 

regards

M.

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

No - there's no SNMP support on the Firepower service modules.

View solution in original post

5 Replies 5

Marvin Rhoads
Hall of Fame
Hall of Fame

No - there's no SNMP support on the Firepower service modules.

thanks MArvin,

 

this helped me a lot

 

regards

Is this still the case?  I've configured the platform settings for FTD's, but never for a SFR module.  It looks like you can create a FirePower policy that includes SNMP.

Marvin Rhoads
Hall of Fame
Hall of Fame

@andrew.butterworth platform policies for Firepower (vs. FTD) are for classic Firepower devices like the old 7000 and 8000 series appliances from Sourcefire/Cisco.

Thanks for the reply Martin.  I've just tried it on an ASA5508-X I have in the lab and it does work.  I created a Firepower platform policy, configured SNMPv2 and added an ACL rule to permit UDP/161 from any. 

I'm not sure what useful stuff we can pull, however I've just done a SNMP walk and it returned 2441 lines.

Is the SFR considered a 'classic' device?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: