NAM 2 upgrade WS-SVC-NAM2

nuno.santos · ‎05-19-2005

I'm trying to upgrade the application image release from 3.3 to 3.4 and i get this failed message:

root@NAM-CGD.lab.pt# upgrade ftp://admin @10.201.201.2/c6svc-nam.3-4-1a.bin.gz

Downloading the image...

Password for admin@10.201.201.2:

ftp://admin @10.201.201.2/c6svc-nam.3-4-1a.bin.gz (46269K)

- [########################] 46269K | 3788.72K/s

47379531 bytes transferred in 12.21 sec (3788.67k/sec)

Uncompressing the image...

Verifying the image...

Image verification failed.

The image you are trying to upgrade is not a valid

Maintenance image or is not compatible with this release.

Upgrade with <ftp://admin @10.201.201.2/c6svc-nam.3-4-1a.bin.gz> failed (1)

This is the show version output:

NAM application image version: 3.3(1-Patch-3)

Maintenance image version: 2.1(2)

NAM Daughter Card Micro code version: 1.31.1.27 (NAM)

BIOS Version: 4.0-Rel 6.0.9

Installed patches:

Thu May 19 13:41:17 2005 Patch: nam-app-patch.3-3-3-0 Description: Patch 3 for NAM release 3.3(1)

Any reason for this failure?

Thanks

Nuno Santos

rmushtaq · ‎05-23-2005

This is because you first need to boot the NAM into Maintenance Partition, then do the upgarde. To boot the NAM into Maintenenace Image, you can run:

reset cf:1 -> CatOS

hw-module module reset cf:1 -> IOS

Once it come up, login using root/cisco (default login) and then proceed with the upgrade. See: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/nam/nam_3_4/swcfg/advcfg.htm for details