Natting From Outside to Inside Access

[Netplace Support]

Hello Everyone,

I want to access my inside zone server ip 10.1.1.250 from public ip 100.1.1.9 via natting. Below is the scenerio

FTD Inside interface ip - 10.1.1.1/24

FTD Outside interface ip- 49.128.1.10 (public ip)

Lan Pool provided by isp- 100.1.1.8/29 ( public ip)

Server ip- 10.1.1.250 

Basically i want to Nat lan pool public ip 100.1.1.9 on internal zone server ip 10.1.1.250 so that i can access from anywhere.

How can i achieve this as this Lan pool is not physically assigned to any interface of FTD.

Any help will be highly appreciated

Regards,

Vishal

[Marvin Rhoads]

You can use a non-locally assigned address such as you have from your ISP.

As long as the ISP knows to route that traffic to your firewall interface address it will work just fine. Simply create a NAT rule and associated Access Control Policy entry.