03-08-2021 05:41 AM
Hi,
Can we configure Cisco NGIPS in transparent mode and in inline mode simultaneously.
BR
03-08-2021 05:49 AM
If this is Multi instant - yes you can different instant different mode
but single instant not that I am aware of this supported.
03-08-2021 09:03 AM
Hello @abdulkarim041,
Yes, you can use them simultaneously. Cisco NGIPS/FTD is a unified software image that consists of 2 main engines:
The High-level packet flow is as follow:
As FTD/NGIPS is a combination of ASA and Firepower engines in the backend, FTD/NGIPS provides two Deployment modes and six Interface modes as below:
Here is a high-level overview of the various FTD deployment and interface modes:
FTD interface mode FTD Deployment mode
Routed Routed
Switched Transparent
Inline Pair Routed or Transparent
Inline Pair with Tap Routed or Transparent
Passive Routed or Transparent
Passive (ERSPAN) Routed
In Short:
*** If you found this as a piece of useful information, please remember to mark this as helpful...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide