02-12-2013 10:29 PM - edited 03-11-2019 06:00 PM
Hi Experts,
I have 20 MB flash available on FWSM and my configuration is huge.Now I am having problem in saving configuration.
My understanding is that cf:4 is partition with 20MB, if this is true is it possible for me to do a repartition of the space by taking some memory from cf3 and adding that to cf4.
If this is not possible, then is it possible to use cf:6 for my boot image and ASDM image as it has 64MB space available.
Regards
Imran
Solved! Go to Solution.
02-13-2013 11:21 AM
Hi Imran,
what you are saying is not possible.
space allocated for the config is only 3 Mb and can not be increased however it is strange that the config size has gone more than 3 MB
that can happen if you do the acl optimization and then try to save the optimized config with
copy optimized running
try "clear flashfs"
Regards,
Amit Rai
02-13-2013 11:21 AM
Hi Imran,
what you are saying is not possible.
space allocated for the config is only 3 Mb and can not be increased however it is strange that the config size has gone more than 3 MB
that can happen if you do the acl optimization and then try to save the optimized config with
copy optimized running
try "clear flashfs"
Regards,
Amit Rai
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide