12-13-2018 06:41 AM - edited 02-21-2020 08:34 AM
Is there away to pull the object network name with both the host or subnet and nat configuration? Currently I am having to do a show run and copy the object with object-groups section along with the NAT sections, paste them into Sublime Text 3 and search for the names then put them together in a separate file to ID the configurations.
EX:
object network Stark_In_Space_Real
host 10.250.250.88
object network Stark_In_Space_MAP
host 1.1.1.1
object network Stark_In_Space
nat (inside,outside) static Stark_In_Space_MAP
What I am looking for to be displayed:
object network Stark_In_Space_Real
host 10.250.250.88
nat (inside,outside) static Stark_In_Space_MAP
I configured firewalls like this, so can I display like this?
Solved! Go to Solution.
12-13-2018 12:49 PM
i can feel for you same happen with me when doing a tshoot on firewall in production network to put thing together in separate notpad
12-13-2018 08:46 AM
you can do object NAT in ASA as below.
object network Stark_In_Space_Real
host 10.250.250.88
object network Stark_In_Space_Real
nat (inside,outside) static interface service tcp 80 80
12-13-2018 10:27 AM
no there is no way you get the output the way you describe.
to get the result you have to
show run object network inline | i DY
show run nat
show nat interface XXXX
show nat
etc.
p.s
please rate if i answer you question
12-13-2018 12:42 PM
I know how to pull the nat configuration. I was looking for away to get the full object network information without having to manually play the mad scientist and gluing everything back together to understand the full picture.
12-13-2018 12:49 PM
i can feel for you same happen with me when doing a tshoot on firewall in production network to put thing together in separate notpad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide