11-27-2007 01:28 AM - edited 03-11-2019 04:35 AM
ı didn't connect pıx clı.It always give error about telnet problem.What is the source in this problem.
11-27-2007 02:30 AM
Would you please tell us the error log you have? You want to connect to PIX via telnet?
11-27-2007 11:19 AM
you need to tell the pix which hosts/networks are allowed to telnet to the pix. for example if you want just your ip address to telnet, and your ip is 192.168.1.100 you issue "telnet 192.168.1.100 255.255.255.255 inside" If you are running version 7.0+ you also need "management-access inside"
11-28-2007 05:19 PM
I would not configure telnet, but ssh for remote access. The above post is also on point. You can do that with ssh.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide