05-15-2008 06:02 AM - edited 03-11-2019 05:45 AM
Hi,
I have a "problem" with my PIX. I've searched the web and can't find an appropriate answer/solution. Hopefully, somebody here will be able to help me.
Here's what I have in my logs:
May 12 12:47:33 pix %PIX-3-710003: UDP access denied by ACL from 10.10.20.1/47808 to intf4:10.10.255.255/47808
May 12 12:47:33 pix %PIX-3-710003: UDP access denied by ACL from 10.10.20.1/47808 to inside:10.10.255.255/47808
May 12 12:47:34 pix %PIX-3-710003: UDP access denied by ACL from 10.10.20.6/47808 to inside:10.10.255.255/47808
Now, this is normal behaviour. The pix receives a broadcast, denies it and logs it. The trouble is, I seems that this logging is not coming from an ACL. I've disable logging on all my "deny" ACL and keep on receiving these messages.
So my guess is that the PIX has an "hidden" function or something that generate these logs. How can I disable it?
I would prefer to have 100% control over my logs by using ACL. That way, i could eliminate all those messages that keep filling my logs by writing "fake" rules that won't log.
Thanx for your help
Kenny Leclerc Jr.
05-15-2008 07:02 AM
no logging message 710003
will turn off the above message logging
M.
Hope that helps rate if it does
05-15-2008 07:06 AM
Hi,
Thanx for the hint.
I've already tried it.
And it does works.
But by doing so, I lose a lot of messages that I don't want to lose. My goal here is to get rid of the "noise" in my logs. All those "broadcast" messages are what I call "noise".
Thanx
Kenny
11-25-2008 12:47 AM
Hi,
i have the same problem. I don't want to log the wins-broadcast to the network-broadcast-address ( for example 192.168.1.255).
What can i do?
Andreas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide