I have 2 IP addresses from my provider, 1 is issued via PPPoE (static) the other is static as a NAMES. I am having issues with a Win2k DNS server behind the PIX communicating with a replication partner on the outside which is on a Win2k3 server. All intitiations must come from the win2k or zone transfers won't happen.
Also, I am having issues browsing from an internal system using the PPPOE address for NAT to the secondary IP on the external interface.
Below is my config. I think I cleaned all my VPN stuff out, but there might be something still there.
Any suggestions on how to best configure this?
I just received the second IP yesterday, prior to that DNS worked (as far as I can tell).
: Saved
:
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxx
passwd xxx
hostname xxx
domain-name baspnet.net
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
name 192.168.1.0 HOME
name 192.168.1.20 WEB01
name 99.x.x.103 pix_outside
name 99.x.x.72 WEB01_OUT
object-group service mailserv tcp
description US Hosting Server
port-object eq ftp
port-object eq pop3
port-object eq imap4
port-object eq www
port-object eq smtp
port-object eq 3389
port-object eq domain
object-group service MSDNS tcp-udp
port-object eq domain
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any source-quench
access-list 101 permit icmp any any unreachable
access-list 101 permit icmp any any time-exceeded
access-list 101 permit tcp any object-group mailserv host WEB01_OUT object-group mailserv
access-list 101 permit udp any eq domain host WEB01_OUT eq domain
access-list outside_access_in permit tcp host WEB01_OUT host WEB01 object-group mailserv
access-list outside_access_in permit tcp any host WEB01_OUT object-group mailserv
access-list outside_access_in permit icmp any host WEB01_OUT
access-list outside_access_in permit tcp any host WEB01_OUT object-group MSDNS
pager lines 24
logging console debugging
mtu outside 1500
mtu inside 1500
ip address outside pppoe setroute
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) WEB01_OUT WEB01 netmask 255.255.255.255 0 0
static (outside,inside) WEB01 WEB01_OUT dns netmask 255.255.255.255 0 0
access-group 101 in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http HOME 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt noproxyarp inside
telnet timeout 5
ssh HOME 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.100-192.168.1.130 inside
dhcpd dns WEB01
dhcpd wins 192.168.2.5
dhcpd lease 86400
dhcpd ping_timeout 1000
dhcpd domain baspnet.net
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
: end
