Hi All,
I am trying to configure the Crypto Map IPSec and ISAKMP on the 1841 just like i did on the Pix 506e creating a VPN tunnel, question is that is it possible or not. i.e on my pix 506e i have it this way, how would i do the same thing on my router 1841.
crypto ipsec transform-set des-set esp-des esp-md5-hmac
crypto ipsec transform-set 3des-set esp-3des esp-md5-hmac
crypto map vpn 10 ipsec-isakmp
crypto map vpn 10 match address vpn-is
crypto map vpn 10 set peer 10.5.0.10
crypto map vpn 10 set transform-set 3des-set
crypto map vpn interface outside
isakmp enable outside
isakmp key hateit address 10.5.0.10 netmask 255.255.255.255
isakmp identity address
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash md5
isakmp policy 1 group 1
isakmp policy 1 lifetime 86400
access-list vpn-is permit ip 192.168.15.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list vpn-is permit ip 192.168.15.0 255.255.255.0 192.168.7.0 255.255.255.0