04-15-2014 08:33 AM - edited 03-11-2019 09:04 PM
Good morning, I am new to the cisco world and just have a quick question about changing IP addresses and default gateway on a Pix 515e appliance. I found out how to change the IP and gateway, but for some reason it still shows the old gateway as the default and I cant seem to delete it. This I believe is causing issues with getting out to the internet. I am receiving emails so I know it is working on the incoming side. Here is what I have when running the show running-config command:
route outside 0.0.0.0 0.0.0.0 38.X.X.X 1
route outside 0.0.0.0 0.0.0.0 107.X.X.X 1
I am trying to delete the 38.X.X.X 1 IP addres because that is the old address from the ISP.
Thanks in advance.
Solved! Go to Solution.
08-27-2014 03:22 AM
Hi,
You can do like this...
route outside 0.0.0.0 0.0.0.0 107.X.X.X
no route outside 0.0.0.0 0.0.0.0 38.X.X.X
Regards
Karthik
08-27-2014 03:22 AM
Hi,
You can do like this...
route outside 0.0.0.0 0.0.0.0 107.X.X.X
no route outside 0.0.0.0 0.0.0.0 38.X.X.X
Regards
Karthik
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide