Pix not sending logs....

[ChuckDLC]

Ok, my PIX firewall was sending logs to my Kiwi logger, then just up one day, stopped. I hacew tried rebooting the firewall and clearing the log settings. I have also tried setting up Kiwi on another machine and sending to it. I turned off logging for now so it doesn't get broken any more. This is the current show:

Syslog logging: disabled

Facility: 20

Timestamp logging: enabled

Standby logging: disabled

Console logging: disabled

Monitor logging: disabled

Buffer logging: disabled

Trap logging: level notifications, 14969387 messages logged

Logging to inside *.*.*.*

History logging: disabled

Device ID: hostname "firewall"

Note: I edited the Logging inside IP for obvious reasons. The trap was originally set to critical, thats the only other thing I changed.

[Patrick Iseli]

Does this gives an error message?

conf t

logging on

The PIX never stop sending messages. I suggest you to check the Kiwi syslogger. Might there be a personal firewall on that host, XP SP2, that blocks that packets comming in. UDP 514

sincerely

Patrick

[ChuckDLC]

Still nothing. Both machines are Win2k3 One is Pro one is Server. No firewalls between them and the firewall in question.