11-12-2004 12:25 PM - edited 02-20-2020 11:44 PM
I am having an issue with my pix stopping traffic between inside to DMZ web server. Normally, I can get from an inside computer to the web server in the DMZ. Then all of a sudden it stops. The PC's can no longer get to the web server. I have to go to the firewall and do a reload command. Once it restarts, the PC's can get to dmz web server again. A few days later, it does it again. Any ideas?
Thanks ahead of time.
11-12-2004 03:03 PM
Hi,
what version of PIX? any syslog messages? Can you share the relevant configs (hide the IP)
before you reboot the PIX, can you try
1- "clear xlat"
2- "clear arp"
see if either one resolves the issue
Thanks
Nadeem
11-15-2004 01:14 PM
Clear xlat and clear arp worked.
But I have to keep doing it.
Do you have any idea why?
Thanks alot.
11-15-2004 01:24 PM
could be couple of reasons. but we need to narrow it down to whether "clear xlat" or "clear arp" is causing it. can you confirm this
11-17-2004 05:47 AM
clear xlat is the one that temporarily resolves the problem. I have to do it about twice a day.
cpu conn count is 6 in use, 41 most used
11-16-2004 02:42 PM
What do you get from the following?
show cpu usage
show connection count
11-17-2004 05:45 AM
0% currently on cpu usage
6 in use 41 most used on conn count
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide