PIX Subnet issue

[sampathkumar.s]

I have confiured the below command in PIX: nat (inside) 10 192.168.128.0 255.255.252.0 0 0. If I configure system ip 192.168.129.100 subnet 255.255.252.0 GW: 192.168.128.6 (intf IP). Internet is not working. There is no ACL configured in Inside interface.

[jgtheodor]

Hi,

First of all i suppose you have already added the relevant global command as well as a default route, pointing the PIX outside interface. Could you check it and inform accordingly?

[sampathkumar.s]

Yes. you are right. global (outside) 10 x.x.x.x netmask 255.255.255.248 and default route to this public ip.

[timkaye]

Can u provide an output of " show conn pro tcp local ip.of.inside.host"

[ckuriyar74]

Try configuring nat (inside) 10 0.0.0.0 0.0.0.0

instead of nat (inside) 10 192.168.128.0 255.255.252.0

Hope this helps. Rate if it does.

Chandru