cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1077
Views
0
Helpful
1
Replies

Problem in downloadinig new PIX image in the failover Unit

sameer
Level 1
Level 1

My existing pix (failover unit) has IOS of (5.3) veersion and i want to update it to 6.2(1) but when i try to copy tftp flash it shows !!!!!!!!!!!!!!!!!! these marks as its tranfering image but at the end the following message appears.

Received 1646134 bytes.

Checksum verification on new image failed.

Image not installed.

please help me in identifying the probem.

Sameer

1 Reply 1

yusuff
Cisco Employee
Cisco Employee

Following link walks through step-by-step procedure to upgrade failover PIXes;

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/config/upgrade.htm#xtocid15

HTH

R/Yusuf

Review Cisco Networking for a $25 gift card