01-30-2024 04:15 AM
Hej
I am having trouble SCPing to a specific firewall. While I can SCP from FW-1 to 2 other FWs, I can not scp file to this specific FW. From what I see, the config should work but I get the below error
copy flash:/anyconnect-linux64-4.10.08025-webdeploy-k9.pkg scp:/flash:/
Error writing scp://admin@10.250.0.1/anyconnect-linux64-4.10.08025-webdeploy-k9.pkg (Resource temporarily unavailable)
I also try from an Ubuntu host but the scp just hangs, eventhough I can ssh from Ubuntu to the FW
scp software/anyconnect-win-4.10.08025-webdeploy-k9.pkg admin@10.250.0.1:/flash:/
From FW I can see it receives connection from Ubuntu
mfw01# show conn address 10.250.3.237
52 in use, 3969 most used
TCP IPSL-LAB-01 10.250.3.237:22 IPSL-LAB-01 10.255.0.21:55933, idle 0:00:21, bytes 232, flags b
TCP IPSL-LAB-01 10.250.3.237:22 IPSL-LAB-01 10.255.0.21:55639, idle 0:00:26, bytes 2080, flags b
FW version and inventory
mfw01# show inventory
Name: "Chassis", DESCR: "Firepower 1120 Appliance, 1RU, 8 GE, 4 xSFP, 1 MGMT"
PID: FPR-1120 , VID: V02 , SN: JMX2730X0WF
mfw01# show version
Cisco Adaptive Security Appliance Software Version 9.16(2)3
SSP Operating System Version 2.10(1.172)
Device Manager Version 7.16(1)
FW Config
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object udp
protocol-object tcp
protocol-object icmp
access-list IPSL-LAB-01_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
access-group IPSL-LAB-01_access_in in interface IPSL-LAB-01
ssh scopy enable
ssh stricthostkeycheck
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group14-sha256
ssh 0.0.0.0 0.0.0.0 IPSL-LAB-OOB-MGMT
ssh 0.0.0.0 0.0.0.0 IPSL-LAB-01
01-30-2024 05:28 AM
Could you please try again without "/flash:/" in the copy command? example:
scp software/anyconnect-win-4.10.08025-webdeploy-k9.pkg admin@10.250.0.1:
01-30-2024 05:48 AM
No change if I remove flash.
01-30-2024 05:32 AM
last post you confirm file transfer via ASDM
so there is update
MHM
01-30-2024 05:47 AM
That was to a different device in the network and it was from my local device to ASA
I am trying from ASA to ASA transfer now, or an Ubuntu server to ASA, and this device alone is having problem with file transfer
01-30-2024 05:52 AM
use same steps as previous post
use ASDM to copy file into both ASA
no need to transfer the file between two ASA
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide