11-26-2014 10:06 AM - edited 03-11-2019 10:08 PM
I have read several of the posts on how to show your pre shared keys in clear text. I am in the process of converting a 5520 over to a 5525-x and I got to the point where I need the pre-shared keys
the more system:running-config command does NOT show the clear text of the keys nor does access the file via https:// either.
the 5520 is running Software Version 8.4(2)18
any thoughts how I can wrestle this info out of the asa as I'm not getting anywhere with what seems to have worked for a few others.
Thank in advance
Sincerely
Paul
Solved! Go to Solution.
11-26-2014 10:45 AM
or
11-26-2014 10:45 AM
or
11-26-2014 10:50 AM
The command more system:run should show you those keys.
Couple things that I have seen
I have seen it where someone configured pre-shared key by cutting and pasting the key as it is shown when you do a show run, so it was entered as ****. You can check this buy entering a dummy config with a key and then run the more system:run and see if it shows up.
also check the privilege level of your login and make sure it is 15.
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide