Site to Site VPN Status in FirePower Management Center

[hunteryoung]

We have began implementing site to site VPNs using our FirePower Management center. I'm wanting to find a way to add the connections to the dashboard so that we can which VPNs are up and the traffic flowing through them quickly. We've created a dashboard for our client VPNs, and we would like something like this (at the time of taking this no one is on our VPN). 

I can figure out which drop down in the widgets to use. 

[Greg Smalley]

The widgets on the dashboard are only for Remote Access VPN.  The only way really to monitor Site to Site VPN tunnels is via Health Events. (System -> Health -> Events -> VPN Status.)

[hunteryoung]

Thank you. We knew the VPN Status in the System Health but were wanting a way to easily, look at a dashboard and tell if a tunnel was up and healthy. It seems there is no way to do this currently in FirePower.

[darknight]

I have been looking for this as well. We had a list of active site to site connections in the ASA. The ability to see what VPN sessions are active is a basic function of the device.

[robertyoung]

Now 3 years on and STILL I cannot find a way to present a nice widget on the dashboard showing our S2S VPNs.

How is something so fundamentally simple missing from the FMC?

[msc_]

** EDIT ** sorry, I missed that you wanted to add the info to the dashboard, I agree it's missing

You can go to devices -> Site to Site Monitoring
This doesn't work for policy based VPN, though.

You can check ipsec sa status by clicking the small eye next to the Node A name when you hover over the item, then you will see output from "show crypto ipsec sa peer x.x.x.x" command (validating if tunnel is up and encap/decaps) in the CLI pane to the right.

Not the ideal solution, but it IS possible.

[Marvin Rhoads]

The site-to-site VPN Dashboard was added as of FMC 7.1:

https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/device-config/710/management-center-device-config-71/vpn-s2s.html