SNMP Configuration on FMC

[kostasthedelegate]

Hello, 

I would like to ask how could I configure SNMP in FMC for the firepower devices(2110). 

As I searched there are 3 places with SNMP configurations. 

1) System>Configuration (It is used for the FMC to be polled)

2) Devices>Platform Settings>Policy>SNMP (It is used for the devices to be polled)

3) Devices>Device Management>Inside a group of a device>SNMP (What is this for?) 

My goal is to send statistics from a specific interface to the SNMP server. I have configured the 2) but the output of the info does not show anything for the interface. 

Could you help clarify the different SNMP configs?

Regards, 

Konstantinos

[balaji.bandi]

here is the SNMP configuration :

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html

Worth checking any log while poll take place from NMS Server to device in Analysys logs what is the errors ?

[kostasthedelegate]

Thank you BB, 

It seems that the problem was on the server side. 

It is working now.

Regards,

Konstantinos

[balaji.bandi · Accepted solution]

if this resolved can you mark as resolved, so use full for other community users.