04-08-2015 05:44 AM - edited 03-11-2019 10:44 PM
Hey all,
I currently have 3 ASA5510's (versions 7.2(3), 8.0(4) and 8.2(1)) which fail to reply with the description value I added on the interface.
I noticed the problem through our Cacti graphs and then checked with snmp-walk.
I've tried both v1 and v2c, no difference.
All other values are returned properly, just not the IfAlias values I'm looking for.
Does anybody have similar experience and a solution in hand?
Many thanks in advance.
05-19-2015 07:42 AM
Hi!
I had the same issue and ifAlias was not supported until 8.2(5). Here is a link to the config guide (just scroll to the bottom):
http://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/monitor_snmp.html
So, i think the only solution is to upgrade.
10-22-2015 05:30 AM
Hi Alexander,
I don't think this is the issue, as I have other ASA's running the same software which do return IfAlias on a snmpwalk. Thanks for your reply though :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide