cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
717
Views
0
Helpful
4
Replies

Some Subnets on my Network Cannot go into the internet when the proxy serve

tonywanjohi
Level 1
Level 1

HELP HELP HELP!!!!!!!!!!!!!!!!!!!!!!!!! some subnets on my network cannot go to the internet when the proxy server has been removed. i suspect that there are Ip's that are not permited. I am still learning Cisco products.....

4 Replies 4

paddyxdoyle
Level 6
Level 6

Are the networks that don't work when you remove your proxy on private addresses?

Are the ones that work on public addresses?

If not are you using NAT?

Does your NAT policy include the networks that can't route out to the internet?

What are you trying to do?

Rgds

Paddy

Tony,

Please post some more details - your (sanitised configs) and as Paddy says, what you are trying to do.

Usistuke hivyo, uko mahali poa...

Josef.

The network that doesnt work is on a Private Address of 192.168.1.0/24 255.255.255.0, 192.168.2.0/24 255.255.255.0

The Network that works is on a Private Address of 192.168.3.0/24 255.255.255.0

Now these is the scenario:

network with a subnet of 192.168.1.0/24 and 192.168.2.0/24 are on different zone(ZoneA) with 192.168.2.0/24(ZoneB). These two networks are connected with a wireless of 256kb/s. The proxy server is on the network that works.

The router has NAT and includes all the networks. When we try going out to the internet without using the proxy on the ZoneA network it works but not on the ZoneB.

I want to make the ZoneB machines to go into the network without having to use the Proxy Server.

Thanks

The network that doesnt work is on a Private Address of 192.168.1.0/24 255.255.255.0, 192.168.2.0/24 255.255.255.0

The Network that works is on a Private Address of 192.168.3.0/24 255.255.255.0

Now these is the scenario:

network with a subnet of 192.168.1.0/24 and 192.168.2.0/24 are on different zone(ZoneA) with 192.168.2.0/24(ZoneB). These two networks are connected with a wireless of 256kb/s. The proxy server is on the network that works.

The router has NAT and includes all the networks. When we try going out to the internet without using the proxy on the ZoneA network it works but not on the ZoneB.

I want to make the ZoneB machines to go into the network without having to use the Proxy Server.

Thanks

Review Cisco Networking for a $25 gift card