Static Nat With Concentrator

[james.jose]

Hi,

I cant seem to create a static nat rule on the concentrator that works, need to create a static nat that all the vpn tunnels could connect to and be translated to an ip that is located on the same lan as the concentrator.

Seems easy enough, NAT rules are enabled and I have created a Lan-to-Lan rule (static)

Source Translated Remote

172.25.33.200 172.25.30.200 192.168.95.4

0.0.0.0 0.0.0.0 0.0.0.0

Have even rebooted the box to clear the existing nat translations. Running latest software update.

Tried creating simple static nat rules as testers and even those dont work.

Thanks

[owillins]

These documents have more information on static nat creation in a concentrator.

http://www.cisco.com/warp/public/471/vpn3k-nat-lan2lan.html

http://www.cisco.com/warp/public/471/config_vpn_3k_site.html

[dianewalker]

Were you able to setup a static NAT? I am having the same problem. Please let me know. Thanks.