Support for NAT on Cisco ASA 5520 Ver. 8.2

[m.pederneschi]

Hi,

I need to permit traffic from the inside to the outside interface for three specific hosts. Those hosts must be Natted with a specific public IP address.

In your opinion the configuration below could work correctly?

access-list Direttore_Generale extended permit ip object-group Direttore_Generale any


nat (inside) 14 access-list Direttore_Generale

global (outside) 14 88.51.x.x


object-group network Direttore_Generale
 network-object host 10.105.21.226
 network-object host 10.105.21.227
 network-object host 10.105.21.88

Many thanks for your support,

Maury

[cofee]

It looks fine to me. It's been a while since I worked on ASA 8.2 . Are you able to test it?

[mamdohmardini]

it should work