Good morning,
I have tried to update my ASAv firewall to the correct time but unfortunately no success. The firewall can communicate with the NTP server. I also reloaded it with no success. Here is the configuration:
RED-IEC-1# sh run | i clock
clock timezone EDT-5 0
clock summer-time EST-5 recurring 5
RED-IEC-1# sh clo
RED-IEC-1# sh clock
14:31:16.051 EST-5 Thu Oct 12 2023
RED-IEC-1# sh nt
RED-IEC-1# sh ntp st
RED-IEC-1# sh ntp status
Clock is synchronized, stratum 3, reference is 51.81.226.229
nominal freq is 99.9984 Hz, actual freq is 99.9984 Hz, precision is 2**6
reference time is e8d27f23.7647ce8c (14:25:19.462 EST-5 Thu Oct 12 2023)
clock offset is -5.6503 msec, root delay is 154.72 msec
root dispersion is 51.33 msec, peer dispersion is 19.62 msec
: Saved
RED-IEC-1# traceroute 51.81.226.229
1 172.16.2.X 10 msec 3 msec 4 msec
2 172.16.2.X 9 msec 20 msec 6 msec
3 172.16.1.X 18 msec 8 msec 8 msec
4 172.16.1.X 26 msec 9 msec 9 msec
5 192.168.1.X 19 msec 23 msec 16 msec
6 99.58.100.1 17 msec 19 msec 19 msec
7 99.167.37.216 23 msec 20 msec 19 msec
8 12.242.116.11 22 msec 31 msec 22 msec
9 *
62.115.11.1 29 msec *
10 62.115.119.230 55 msec
62.115.120.176 57 msec
62.115.119.230 217 msec
11 *
62.115.140.209 78 msec *
12 192.99.146.64 70 msec 56 msec 65 msec
12 * *
198.27.73.88 81 msec
13 *
142.44.208.161 119 msec 112 msec
142.44.208.229 113 msec 122 msec 120 msec
14 51.81.226.229 112 msec 90 msec
TIA
