03-20-2013 01:54 PM - edited 03-11-2019 06:17 PM
I have two external address that need to talk to each other.
I know this does NOT require a VPN tunnel to do so and NAT is not needed either.
I need to enable access on the outside interface for a public ip>
(public IP that lives on my ASA <------------------------- > needs to talk to another public ip that lives on the outside of my network)
Any help or suggestions would be appreciated!
Solved! Go to Solution.
03-20-2013 04:13 PM
Hello,
Then it should not reach the ASA at all as it's on the outside interface.
Internal subnet -----ASA----Outside subnet------Switch----ISP Modem-------------- Internet-----Other PC
|
|
Outside PC
Communication does not need to flow to the ASA if the ISP modem router or whatever device it's there has the right mac address assignment for Outside PC Ip address,
Clear enough? let me know
Regards
03-20-2013 03:45 PM
Hello Shawn,
So basically a user that is outside the ASA but on the same subnet than the ASA outside interface wants to communicate with a public address that is being used by an internal address via NAT, Rigth?
03-20-2013 03:48 PM
Well Host B which is not on my network needs to talk to Host A which is on my network.
Both have public ip addresses.
03-20-2013 04:13 PM
Hello,
Then it should not reach the ASA at all as it's on the outside interface.
Internal subnet -----ASA----Outside subnet------Switch----ISP Modem-------------- Internet-----Other PC
|
|
Outside PC
Communication does not need to flow to the ASA if the ISP modem router or whatever device it's there has the right mac address assignment for Outside PC Ip address,
Clear enough? let me know
Regards
04-01-2013 09:52 AM
Figured it out... I added both external ips via an permit acl to the outside interface.
Thanks for replying.
04-01-2013 10:14 AM
Hello,
Sure, my pleasure,
Please mark the question as answered so future users can learn from this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide