06-30-2019 11:35 PM - edited 02-21-2020 09:15 AM
I have problem with access to FMC using admin account, because accidentally disable Role administrator on external authentication tab, and now i can't access the gui on FMC, but i still can access the cli using admin
anyone here know how to enable administrator role from CLI?
regards
Solved! Go to Solution.
07-02-2019 08:50 PM
Hi BB,
this happen because the Administrator Role was disabled
i just solve the problem by editing the role from the CLI
root@firesenal:/var/log/httpd# eo_tool
?> use UserRole
edit 0 (the Role number ) its mean Administrator
$VAR1 = {
'description' => 'System-Provided',
'is_active' => 1, before is 0 (because disabled from System->Users->UserRole on FMC)
'is_assigned' => 1,
'key' => 'admin',
'name' => 'Administrator',
etc...
save the config and you have access to administrator on FMC via Web
hope this help others
thanks for your help BB
regards
BMS
07-01-2019 12:49 AM - edited 07-01-2019 12:49 AM
The Firepower Management Center has a web interface and Linux shell for direct management of the device.
The Firepower Management Center supports two different internal admin users: one for the web interface, and another with shell access. These two admin users are different accounts and do not share the same password.
Firepower Management Center internal users added in the web interface other than admin have web interface access only.
You can grant shell access to Firepower Management Center external users.
On the Firepower Management Center when any account with shell access logs in to the management interface, it directly accesses the Linux shell.
here is the guide
07-01-2019 01:58 AM
Hi BB,
thanks for your answer,
in my case, i totally can't access the FMC web Interface because i click an option on disable administrator, on rule option (if im not wrong) and then i lost access to web Interface
is any way to active administrator for web Interface from CLI ?
07-01-2019 08:21 AM
Another suggestion from CLI you can create an another user with Admin full access with the below command :
> configure user add balajibandi config <-- replace balajibandi with your name then login to web
07-02-2019 08:50 PM
Hi BB,
this happen because the Administrator Role was disabled
i just solve the problem by editing the role from the CLI
root@firesenal:/var/log/httpd# eo_tool
?> use UserRole
edit 0 (the Role number ) its mean Administrator
$VAR1 = {
'description' => 'System-Provided',
'is_active' => 1, before is 0 (because disabled from System->Users->UserRole on FMC)
'is_assigned' => 1,
'key' => 'admin',
'name' => 'Administrator',
etc...
save the config and you have access to administrator on FMC via Web
hope this help others
thanks for your help BB
regards
BMS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide