cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1056
Views
0
Helpful
4
Replies
MedTiti92
Beginner

unable to find etherchannel in FMC 6.5.0.2 with FTDv-2130 6.3.0

Hi

 

I have a FTDv-2130 version 6.3.0 managed by a FMC with version 6.5.0.2; and i can't find etherchannel in main page of the device when i want to add an etherchannel interface. see below the picture.

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

@MedTiti92 because an etherchannel is a virtual interface, so in the virtual environment you'd be bundling 2 or more virtual interfaces into another virtual interface. There is no benefit doing that, hence why it's not supported.

View solution in original post

4 REPLIES 4
Rob Ingram
VIP Mentor

@MedTiti92 

Etherchannel is only supported on physical hardware not virtual appliances (FTDv or ASAv).

@Rob Ingram 

i understand that Etherchannel is supported on physical hardware, so why in my FTDv i don't have this ...

@MedTiti92 because an etherchannel is a virtual interface, so in the virtual environment you'd be bundling 2 or more virtual interfaces into another virtual interface. There is no benefit doing that, hence why it's not supported.

View solution in original post

balaji.bandi
VIP Master

I do not believe that the Virtual version support Port-channel.

 

I do have implementation for the hardware it supports.

 

https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/215351-configure-verify-and-troubleshoot-port.html#anc13

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help