08-19-2015 06:26 AM - edited 03-11-2019 11:27 PM
Hi,
We have recently purchased a replacement 5512x as our old unit had several fan failures, we thought we could simply backup the config of the existing unit and restore to the new one and hey presto!!
I am able to connect to the unit through console and can see the config which looks correct but when i try to loging through ADSm it will not recognise my user or any user in fact it.
When i click ok after entering my user and password it just comes backup with the same box.
Any ideas?
Many thanks
08-19-2015 04:41 PM
Please check that the new box has the 3DES-AES license enabled:
show ver | i 3DES
Also, please share the output of:
show run ssl show run http
08-20-2015 02:11 AM
Hi Marvin,
I got this response
DataCenterAsa# show ver | i 3DES
Encryption-3DES-AES : Enabled perpetual
And also these
DataCenterAsa# show run http
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.30.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
DataCenterAsa# show run ssl
Gave no results
08-20-2015 01:20 PM
So for ssl, we would normally expect something like:
ssl trust-point ASDM_TrustPoint1
That assumes a self-signed certificate has been generated and bound to a crypto ca trustpoint named "ASDM_TrustPoint1".
See this example (they used "self" as the name).
08-20-2015 07:18 AM
Delete the existing ASDM image and config on ASA and upgrade its version and re-enable it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide