Hi,
I have a FRP-2110 (hardware)and ASA 9.8 OS Image running on it.
I try to upgrade ASA image to a new a version.
Should I use ASDM to upgrade as normal or is there a special requirement for this?
Thanks
Loc.
FYI: below is show run on my firewall
abc-fw1(config)# show version
Cisco Adaptive Security Appliance Software Version 9.8(4)15
Firepower Extensible Operating System Version 2.2(2.121)
Device Manager Version 7.8(2)
Compiled on Thu 14-Nov-19 08:30 PST by builders
System image file is "disk0:/mnt/boot/installables/switch/fxos-k8-fp2k-npu.2.2.2.121.SPA"
Config file at boot was "startup-config"
abc-fw1 up 331 days 19 hours
failover cluster up 1 year 213 days
Hardware: FPR-2110, 6842 MB RAM, CPU MIPS 1200 MHz, 1 CPU (6 cores)
1: Int: Internal-Data0/1 : address is 000f.b748.4801, irq 0
3: Ext: Management1/1 : address is 00fc.ba7a.2b95, irq 0
4: Int: Internal-Data1/1 : address is 0000.0100.0001, irq 0
License mode: Smart Licensing
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 1024
Inside Hosts : Unlimited
Failover : Active/Active
Encryption-DES : Enabled
Encryption-3DES-AES : Enabled
Security Contexts : 2
Carrier : Disabled
AnyConnect Premium Peers : 1500
AnyConnect Essentials : Disabled
Other VPN Peers : 1500
Total VPN Peers : 1500
AnyConnect for Mobile : Enabled
AnyConnect for Cisco VPN Phone : Enabled
Advanced Endpoint Assessment : Enabled
Shared License : Disabled
Total TLS Proxy Sessions : 4000
Cluster : Disabled
Failover cluster licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 1024
Inside Hosts : Unlimited
Failover : Active/Active
Encryption-DES : Enabled
Encryption-3DES-AES : Enabled
Security Contexts : 4
Carrier : Disabled
AnyConnect Premium Peers : 1500
AnyConnect Essentials : Disabled
Other VPN Peers : 1500
Total VPN Peers : 1500
AnyConnect for Mobile : Enabled
AnyConnect for Cisco VPN Phone : Enabled
Advanced Endpoint Assessment : Enabled
Shared License : Disabled
Total TLS Proxy Sessions : 4000
Cluster : Disabled
Serial Number: JADxxxxxxxx
Configuration last modified by root at 09:14:30.899 CST Fri Feb 4 2022
abc-fw1(config)#
