04-24-2019 02:49 AM - edited 02-21-2020 09:04 AM
Hi,
current image is asa915-k8.bin 9.1(5)
asdm 7.2(1) -asdm -721.bin
Planning to upgrade asa917-32-k8 ,in that case what would be the asdm image file ?.
Or I can just use the same asdm (7.2(1)) , If not which version need to be installed . ?
And before going for upgrade is there anything need to be checked . ?
What are the upgrade procedure for active standby ?
Thanks
04-24-2019 06:39 AM
Hi elite2010,
Here is a table of compatibility of ASA and ASDM versions:
https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html#id_59423
Usually, what you do is you upgrade the secondary (standby) unit, then initiate failover, so that secondary unit takes over active role and then upgrade the primary unit. Then you fail back to primary again. This way you achieve a zero downtime upgrade.
04-30-2019 05:37 AM
Hi,
There is IPS module , is it necessary to upgrade ips module ?
if yes how can I do that ?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide