08-27-2010 02:26 PM - edited 03-11-2019 11:31 AM
I just upgraded to an ASA5520. More or less everything has been going well. I have a user in a SOHO with a small home network. On his laptop once he enables his VPN he can not access his laptops printer or RDP into it. I have split tunneling enabled. I am not sure why this is happening?
08-27-2010 02:57 PM
Seems like his soho network and you vpn local pool are on same
rfc 1918 subnet.
Thanks
Manish
08-27-2010 03:45 PM
Manish:
Thanks for replying to me post.
I thought the same thing. His SOHO network is 192.168.11.0.24 and the VPN is 10.2.200.0/24. I am very puzzled by it. I am going to try and recreate it in a lab.
Harrison
08-27-2010 03:48 PM
take a look at the following link.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702992.shtml
08-27-2010 03:59 PM
Check for following command in your configuration under the group policy attributes then :-
split-tunnel-policy excludespecified
split-tunnel-network-list value local-access
also need an access list for this :-
access-list local-access standard permit host 0.0.0.0
hope it helps
Thanks
Manish
08-28-2010 05:21 AM
Just a shot in the dark, but does the user have the "allow local lan access" box checked on his VPN client?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide