It’s the start of the new year, and with the new year usually comes a list of resolutions. Unfortunately, it’s also about the time of year that people start cutting corners on these resolutions: less frequent visits to the gym or staying up longer just because you’re not able to overcome the “Next episode playing” message on Netflix.
When it comes to managing your network, you can’t afford to cut corners anymore – the digital transformation is requiring that organizations big and small become digital businesses, and a digital business demands application agility. To achieve that agility, faster network provisioning is required. To provision your network faster, simplification is needed.
Enter: Cisco’s Intelligent WAN Application, or IWAN App. IWAN App is an application hosted by the Application Policy Infrastructure Controller Enterprise Module (APIC-EM) which allows you to accelerate the deployment of IWAN and align to business priorities based on applications and user needs through a highly intuitive, policy-based interface.
With the IWAN App, you will be able to fulfill your WAN Resolutions – 4 goals any organization should have for network management:
Automated site provisioning
Dynamic business policy
WAN monitoring and management
Over the next few weeks, we will be releasing a series of short videos on the Communities platform demonstrating how the IWAN App will help you achieve your WAN Resolutions.
Stay tuned and check out the link to the first video here!
Hello all, I have R1 and R2, each are connected through the public internet by using IPsec tunnel, and on this R2, i have one management interface: INT F0/0.99 10.10.99.3 /24 I would like to telnet from R1 LAN to the interface on R2, but un...
What is the difference between "isis three-way-handshake ietf" and "isis three-way-handshake cisco" ? When I did packet capture with isis three-way-handshake ietf there were extended local circuit ID , Neighbor system-ID and neighbor...
We have a hub and spoke router but connection should work only when primary connection at the site fails however I run to a issue that from hub we are fording the traffic via the tunnel instead via the private connection.As checked between working and non...
Hello,I hope you and your loved ones are safe and healthy. I am want to integrate a Cisco Integrated Service Router "RV-345" into my network & use VLAN to segregate traffic. Current setup:Netgear Wi-Fi router is the only component carrying o...
I am now working on Catalyst 9200L-24T-4G and 48T-4G switches. When I tried to configure trunk ports, the option switchport encapsulation dot1q/isl doesn't exist. Then I looked for data sheets and there isn't any mention about ISL, but...