Hello, I am creating a wireless network with a router and I need to set a certain IP address for the router through the web browser of a PC:
Currently the Router IP is 192.168.0.1
Set the WAP Network Setup to the first IP address on the second private class C network with default subnet mask Start the DHCP server on the 15-th IP address and set the maximum number of users to be 25.
DHCP is currently 192.168.0.100 with 50 maximum hosts
Every time I try to troubleshoot it, the web browser loses connection and times out and the router itself is locked.
Some time ago my instance of Prime 3.8 lost ~ about half of its mapping data. Any means to determine when the event occurred so I can reach back and do a restore? AP positioning's are not otherwise recorded and will be a bit difficult to recov...
I have two primary windows domain controllers with separate ip addresses. I would like one to act as a primary DNS and the other secondary. How do i get my cisco router to dynamically assign the the two windows DNS server ip addresses to all clients withi...
Good day,I have a windows domain controller that has the DHCP role installed. The DHCP role issues out IP addresses,. I would now like like the cisco router to issue out IP addresses to clients within my domain. What is the process of setting this up ?Rou...
Hey, I need a bit of help. I need to set up a remote access port forward to a machine existing in a vrf. Because it's in a vrf I cannot use the interface command, I can only specify the wan IP. I have no option for a static IP so i ne...
Hello Team, We are configuring dot1x on ASR1001-x, the configuration is detailed below: Router(config)# dot1x system-auth-control
Router(config)# aaa new-model
Router(config)# aaa authentication dot1x default group radius