on 12-29-2010 03:13 PM
The following are manufacturers that are currently supported by LMS 4 for limited monitoring, archiving, and topology services. You can get more detailed information by going to LMS --> Inventory --> Add/Import/Manage Devices --> select an existing device type and choose "Edit Identity" --> Device Type --> Expand "Non-Cisco Devices" for the manufacture listed below. The expanded selection should detail manufacturers, model, and OID supported by LMS.
This document is a work in progress and will be updated on an ongoing basis.
Manufacturers:
3Com Hosts
This is great Nael,
What can we expect from this "limited monitoring, archiving, and topology services" ?
I noticed that the HUM component works nicely on 3rd party devices.
What can we expect from the rest?
can RME now get an inventory on them and track changes on the inventory?
You mention topology. Does this mean that Campus can "see" how these 3rd party devices are connected? I thought it used only CDP to do this. Has this improved?
Anything else? DFM ?
Cheers,
Michel
Thank you Nael for sharing this information at Support Forum.
Thanks & Regards
Gaganjeet
Nael,
I got a customer with LMS 4.1 that wants me to monitor his bluecoat and a dozen APC ups's
What can he expect from LMS?
Thanks,
Michel
Hi Nael,
I assume Siemens IP PBX is also supported?
Is there an updated matrix for LMS 4.2.3? I need to know if this supports Netscaler load balancers.
Thanks, Karl
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: