To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about smart licensing on Cisco Catalyst switches, including 9000 (9200, 9300, 9400, 9500, 9500H, and 9600 Series) and 3000 (3650 and 3850 Series) switches. Cisco experts will review and clarify the benefits, basic concepts, considerations, different types of registrations, and general FAQs. In addition, a live demonstration on how to register a license with a Cisco server will be provided.
Ask questions from Thursday, July 30 to Friday, August 7 2020
Luis Celis is a Technical Consulting Engineer on the Enterprise Routing & Switching team at Cisco’s Technical Assistance Center in Mexico. He provides top-level technical support for global customers with Catalyst 9000 and 6800 switches. Previously, he collaborated with the Service Provider team. Before joining Cisco, he worked with Ericsson solving customers challenges and providing solutions for massive network optimizations. Luis holds a bachelor’s degree in Communications and Electronics Engineering from the Instituto Politecnico Nacional (IPN) in Mexico.
Luis might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Switching category.
Hello, In out subnetwork we are using many internet lines and accessing these inernet lines reachability is controlled via cisco mac access-list which is configured and applied on the C3750 switch.everything was working perfectl...
Hi all, Basically, we have a lot of imaging right now. I was just curious if it was possible to dynamically put the machine into a different vlan when pxe booting to not use up the IP addresses in a scope. Of course, I could just shorten the lease ti...
Hi We have provisioned some of our existing wlc`s into DNA. And have had some problems around our voice setup. Our existing WLAN setup had CCKM enabled for old 7925 cisco iphones. However the CCKM option is nowhere to be found in DNA, so in order to ...
Hi,I am trying to make Android ACTS setup for WiFi testing. I tried with setup as below:Android DUT (debug) <=> Ubuntu Machine + Python + ACTS "tools /test/connectivity" <=> Cisco WLC2504 <=> Cisco AIR-CAP2602I-A-K9 As pe...