To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about the best network design practices. The session covers network design, its roots and principles, and the mindset needed to be a successful designer and a holistic network architect. When it comes to network design, a solution is considered successful if it meets business requirements through technology implementation. Network designers are the bridge between technical and business domains. In this role, they must understand the business goals and be able to translate them into requirements that drive the technical implementation.
Ask questions from Monday 11th to Friday 21th of December, 2018
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and a Cisco Designated VIP for 2017 and 2018. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
David might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Networking community.
NOTE: This lab utilizes the dCloud platform for delivery. Be sure to schedule your session ahead of time!
Digitization is placing unprecedented demands on IT to increase the speed of services and applications delivered to customers, partners, and employe...
I have a router with a default route set to the first WAN. I want to set up a second WAN but can't remove the default route because the router is live. I have added an ip policy to the second WAN interface but it is being ignore and it uses the default ro...
The multicast configuration guide for NXOS 9.2 on N9K switches says at the top of the PIM chapter:
"For PIM Bidir, you must configure the ACL TCAM region size using the hardware access-list tcam region mcast-bidir command"
I am con...
Hello, I have some trouble with tacacs configuration when i have a VRF Switch : C3750EIOS version :15.0(2) My configuration : aaa group server tacacs+ Netxpserver-private 10.10.41.4ip vrf forwarding MAISON_VEip tacacs ...
Hi! someone gave me 5 cisco 7960 ip phones with which i'm currently having fun. Sadly i only have one power cube to power them, so i've been looking into PoE. Could someone tell me if theCatalyst 2960C-12PC-Lswitch is retro-compatible with pre-standa...