BGP Multi-homing: Design and Troubleshooting - Video from live Webcast

[Mani Ganesan]

11928286.mp4 (2)

Video Player is loading.

Play Video

Play

Mute

Current Time 0:00

/

Duration 0:00

Loaded: 0%

0:00

Stream Type LIVE

Seek to live, currently behind liveLIVE

Remaining Time -0:00

1x

Playback Rate

Chapters

• Chapters

Descriptions

• descriptions off, selected

Captions

• captions settings, opens captions settings dialog
• captions off, selected

Audio Track

Picture-in-PictureFullscreen

This is a modal window.

Beginning of dialog window. Escape will cancel and close the window.

Text

ColorWhiteBlackRedGreenBlueYellowMagentaCyanTransparencyOpaqueSemi-Transparent

Background

ColorBlackWhiteRedGreenBlueYellowMagentaCyanTransparencyOpaqueSemi-TransparentTransparent

Window

ColorBlackWhiteRedGreenBlueYellowMagentaCyanTransparencyTransparentSemi-TransparentOpaque

Font Size

50%75%100%125%150%175%200%300%400%

Text Edge Style

NoneRaisedDepressedUniformDropshadow

Font Family

Proportional Sans-SerifMonospace Sans-SerifProportional SerifMonospace SerifCasualScriptSmall Caps

Reset restore all settings to the default valuesDone

Close Modal Dialog

End of dialog window.

Close Modal Dialog

This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

This is a video from the live webcast on BGP Multi-homing with Cisco Support Engineer and CCIE Manigandan Ganesan. This webcast provides an overview of BGP Multihoming and gives advice on how to troubleshoot common BGP problems like peering and high CPU.

This FAQ has all the questions that were asked during the event. You can also view more related questions answered by Manigandan in this Ask the Expert Event.

[ciscodaze]

very nice presentation Mani, very clear.

KN

[peddapalli.p]

Hi Everybody, I'm new to this forum. I cannot view the above video. Can you pls suggest me how to open it?

[Steven73]

hi Manigandan

It is informative and BGP useful case

I have queries on Load Balancing mode

1. on p.29,

 network 121.10.0.0 mask 255.255.224.0
network 121.10.0.0 mask 255.255.240.0

Is network 121.10.0.0 mask 255.255.240.0 already included in network 121.10.0.0 mask 255.255.224.0 ? if yes, then network 121.10.0.0 mask 255.255.224.0 is enough ? no need

network 121.10.0.0 mask 255.255.240.0 ?

on p.23, Announce /19 aggregate on each link

but on p.28, Split /19 and announce as two /20s, one on each link

to split 121.10.0.0 /19, would it be  121.10.0.0/20 and 121.10.16.0/20 ?

apply 121.10.0.0/20 on router A, 121.10.16.0/20 on router B ?

2. on p.29, ip prefix-list default permit 0.0.0.0/0. if which networks would be inbound, then that networks is allowed ? to minimize unknown inbound traffic

thanks

Steven73