Cisco Nexus 9336C-FX2 factory-reset revovery

[nastor5]

Hello all, we have made the mistake of running factory-reset on of our Cisco Nexus 9336C-FX2 switches.

After the reset, the switch is now stuck in loader prompt. We tried setting IP and getway for tftp boot but are unable to ping the IP.

Could anyone guide us with this.

Case has been raised with Cisco Support but since this is a new switch and not in production, priority is P3.

[MHM Cisco World]

Do

> dir 

Then select image yoù want to boot 

Do 

> boot image 

Wait 

And you can enter from there

[M02@rt37]

Hello @nastor5,

Do Dir: then check if an image exist, if yes boot on that bin file if not try to put the image on an usb stick and boot from there.